What is the Fire Arrestor (Safety Valve) Used for Hydrozone and How to Use It?
WHAT IS THE FLAME ARRESTER (SAFETY VALVE) USED FOR HYDROZONE AND HOW IS IT USED?
The hydrozone welding machine, which has been used more commonly in recent years, can be dangerous if the necessary precautions are not taken and sufficient information is not obtained about its use. Of course, it is a very useful machine when the necessary training and precautions are taken. Even if you are an expert and experienced, small mistakes made from time to time can cause big problems. There is definitely a SOLUTION for every problem. The biggest problem that can be experienced with the hydrozone (electrozone) welding machine is the fire leaking inside . Considering that business life is intense and stressful, it is understood that absent-mindedness is inevitable. As a result of these absent-mindedness, the fire that should be turned off after we are done with the machine can be turned off using an incorrect method (by slowly closing the air of the head while there is fire at the tip of the needle). As a result of this incorrect closing, a major financial result can occur in the internal parts of the machine. This is why the use of the product we call a flame arrester (safety valve) is very important and it is definitely recommended to use it.
What is a flame arrester (safety valve)?
- Flame arrester (safety valve) : It is a product that provides one-way passage of the gas produced by the hydrozone machine. It has a certain pressure range and is an extremely important and effective product when used for this pressure range.
How to use a flame arrester (safety valve)?
- If possible, ask a technical service to install this product on your machine.
- If you purchased this product yourself, you can install it on your machine by following these steps:
1- Make sure that the product you purchased is compatible with your machine.
2- Cut the hose coming out of the outer chamber of the Hydrozon welding machine close to the outlet. (Make sure the machine is turned off)
3- Attach the Flame arrester (safety valve) to the end of the hose that is not connected to the machine in the direction of the arrow. In other words, the direction of the arrow (which shows the direction in which the gas will move) should be in the same direction as the direction of the flame coming out of the machine. Then attach the other part of the valve (opposite the direction of the arrow) to the free end of the hose entering the machine.
As a result of all these processes, you can use your machine safely.
What did I learn in this guide?
In this guide, you have learned how to install the Flame Arrester (Safety Valve) and how to use the Flame Arrester (Safety Valve). In this way, you will have taken precautions against any negativity that may occur while using the hydrozone welding machine (Electrozone machine).
How to use Hydrozon Welding Machine? How to use Flame Arrester (Safety Valve) that you have read by reading our blog post? Our blog post will be more explanatory for you.
Questions about our Fire Arrester (Safety Valve) Blog Article?
Where Can Fire Arrester (Safety Valve) Be Obtained?
You can get it from Çözümtools or you can request it from the stores where you supply hydrozone.
Does the Fire Arrestor (Safety Valve) Fail?
No, it won't break. However, if you use the machine for a long time (3-6 months), the flame arrester may become clogged. You can reuse the fire catcher by cleaning it under hot water.
How Many Fire Arresters (Safety Valve) Should I Use for 1 Hydrozone Welding Machine?
Depending on the connection you will make, it will be sufficient to install 1 fire arrester (safety valve) from the place where the fire will come out. Applies to all machine types.